adhesives and special solvents for the industrial needs

Adhesives composite 

We fix your best ideas

RSB 133

123-456-7890

Solvent-based spray adhesive, with elasrtomers and synthetic resins for the positioning of fabrics as fiberglass, carbon and others, in infusion processes, R.T.M., R.F.I., PREPREG.

The use of RSB133 does not affect the resin thermosetting and the his structural integrity.

FIELDS OF USE

​

-Positioning of fiberglass, carbon, kevlar and other fabrics.

​

-Positioning of multiple horizontal layers of fabric.

​

​

- Coupling of fabrics with various types of plastic films.

​

- Block fabric textures to facilitate cutting operations.

123-456-7890

RSB 137

Solvent-based spray adhesive, with elasrtomers and synthetic resins for the positioning of fabrics (fiberglass, carbon and others), and foams (PU - PVC - PET and others), in infusion processes, R.T.M., R.F.I., PREPREG.

The use of RSB137 does not affect the resin thermosetting and his structural integrity.

FIELDS OF USE

​

-The positioning of fiberglass, carbon, kevlar and other fabrics.

​

-The Positioning of foams as PU, PVC, PET and more.

​

-The positioning of multiple layers of fabrics and foams horizontally, vertically and upside-down.

​

- The positioning of multiple layers even of different foams.

​

- The positioning of multiple layers of plywood to foams.

​

- The positioning of fabrics with different plastic films.

​

- Block fabric textures to facilitate cutting operations..

PI 10

Specifically formulated for vacuum infusion.

Superior holding during the infusion process.

Low shrinkage during Curing.

Fine mist adhesive with blue tracer.

Safely bonds laminating materials to core surfaces.

Fast tack.

123-456-7890

PI10 is designed to adhere and hold reinforcing materials including fiberglass, core boards, soric, and peel ply in place prior to and during infusion. 

PI10 adhesive has many unique propertiest specifically  to overcome the problems normally associated with using other types of adhesives such as bonding failure, resin blockage, surface defects in the finished product.

Carbotack

CARBOTACK is a special epoxy mist spray adhesive suitable for the
 fabrics positioning (carbon, kevlar, glass), in infusion, R.T.M., R.F.I., PRE PREG process. Also, it can be used to bond fabrics with plastic films or to block fabric textures to facilitate cutting operations.

​

​

ADVANTAGES

​


- High epoxy resins compatibility


- No yellowing and reaction, even at high temperatures (until 200 ° C)


- Transparent adhesive film forming without defects producing.
- --

Formulated to avoid gasification defects during the cross-linking and cooking process
- Adjustable flow :3-position valve (L-M-H) dispensing

Adhesives automotive 
sector

We fix your best ideas

MPM40 Thermoplastic adhesive

PLP100 Polychloroprene adhesive

APS01 Primer anchor

PLR80  Polyurethane adhesive

CA02  Cyanoacrylate adhesive

Adhesives 
foams sector

We fix your best ideas

ESP 100

123-456-7890

High dry residue spray adhesive for instant bonding of various types of foam such as EPS, XPS, PVC, PU, ​​PET etc. 
 

It is a synthetic based adhesive with high initial tack, it can be used by applying the product on one side and glued within 1-2 minutes, or by applying the product on both sides with a time varying from 30 seconds to 20 minutes.

FIELDS OF USE

​

-It is used to couple foams of various types and densities together, it is also suitable for coupling foams to various substrates such as plasterboard, wood, metal, fabrics, felts, cardboard, foam, soft foams, vinyl materials, leather, rubber of various types etc.

It is suitable for gluing foams even on materials with high absorption coefficient, it is a low penetrating product

Adhesives 
upholstery sector

We fix your best ideas

MPM40 Thermoplastic adhesive

PLP100 Polychloroprene adhesive

APS01 Primer anchor

PLR80  Polyurethane adhesive

CA02  Cyanoacrylate adhesive